FEATURES:
Oversized spindle bore of 80mm
Main spindle dynamic balanced, and supported at 2 points with taper roller bearing of Harbin brand
Outward appearance of machine features large plains, making the machine more good-looking
Gapped bedways, which are super-audio frequency hardened (HB450 plus)
All gears hardened and ground by Reishauer grinding machine
Leadscrew and feedrod interlocked, both with overload protection
Automatic feed stopper
Configuration variable totally according to orders:
Metric or inch system; right or left hand wheel; halogen lamp; quick change; tool post; DRP; T-slot compound; chuck guard; leadscrew hood; rapid traverse motor; electromagnetic brake; forced lubrication system.
Item Model
CD6240C
CD6245C
CD6250C
CD6260C
CAPACTIES
Max. swing over bed mm
400(16")
360(14")
500(20")
600(24")
Max. swing over cross slide mm
225 (9")
285(11 1/5")
325(13")
425(161/4")
Max. swing in gap mm
530(21")
580(23")
630(25")
730(29")
Center distance
750, 1000,1500, 2000mm
Cross slide travel mm
330mm
380mm
SPINDLE
Spindle hole
§¶80mm(23/5")
Spindle nose
ISO-C8 or ISO-D8
Spindle taper
Metric 85mm
Spindle speeds
24-1600rpm (15 Steps)
FEEDS
Metric threads range (Kinds)
0.5-28mm (66Kinds)
Inch threads range (Kinds)
1-56tpi (66 Kinds)
Module threads range (Kings)
0.5-3.5mm (33 Kinds)
Diametral threads range (Kings)
8-56tpi (33 Kinds)
TAILSTOCK
Spindle diameter
65mm(23/5")
75mm(3")
Spindle taper
Morse No. 5
Spindle travel
120mm(43/4")
Main motor
5.5kw or 7.75kw
7.5kw
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
