The machine is specialized in processing devices with deephole parts. It mainly adopts BTA methods to drill deephole parts with small diameters, which can not only drilling & boring but rolling as well.
The clamping of workpieces and oil carriage are controlled by hydraulic system with properties of safety and easy operation. The machine is suitable for various technique demands for processing of different hydraulic oil cylinders, spindle holes, cylinder holes and coolant holes. The machine can be mated with drilling box to be satisfied with a variety of technical manufacturing requirements.
Series of variant products can be supplied on the customers'order.
specifications
technical data
Max boring diameter
Φ100mm
Range of drilling diameter
Φ20-Φ40mm
Max boring depth
1000-3000mm
Clamped diameter of steady rest
Φ20-Φ180mm
Center height of spindle
250mm
Spindle bore of headstock
Φ65mm
Front taper of spindle
Φ80mm 1:20
Spindle speed range
81-1250r/min 12 grade
Feedrate range (stepless)
5-1000mm/min
Rapid travel speed of the carriage
2000mm/min
Main motor power
15kW
Hydraulic pump motor power
1.5kW
Power of rapid travel motor driving carriage
3kW
Feed motor power
3kW
Coolant pump power
5.5kW(2groups) 7.5kW(1group)
Rated pressure of coolant system
2.5MPa-6.3MPa
Coolant flow
80 180 280L/min
Rated pressure of hydraulic system
6.3MPa
length
Occupied floor LXHXH
N/W(t)
G/W(t)
1000mm
6600×2750×1400
7.5
8
2000mm
8600×2750×1400
10.5
11
3000mm
10600×2750×1400
11.5
12
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
