The machine is mainly used for grinding and milling the connecting surface between cylinder body and cylinder cover of every engine (of automobiles, tractors, tanks and ships). Because of the engine be used for long, the connecting surface of cylinder body and cylinder cover would transmute and the engine will working off normal. Working accuracy can be achieved that the connecting surface of cylinder body and cylinder cover be ground or milled. The machine can also grinding the surface of other parts if the electromagnetic chuck be equipped.
The machine tool characteristic
1.The machine adopt (1400/700r/min) two-speed motor 1400r/min be used to grind the surface of cylinder body or cylinder cover, which be made by cast-iron material. And 700r/min be used to milled the surface which be made by aluminium material. Emery wheel feeding is manual. Emery wheel feed 0.02mm during hand wheel rotate 1 lattice. Pulley adopt with unloading to make the main spindle only usutain twisting moment.
2.The machine tool working table selects and uses the Y801-4 electric motor drive by rotating, on host face ply, the potentiometer whorl twists and to gain right feed speed, easy to operate reliable.
Model
3M 9735A × 130
3M 9735A × 150
Working table size
1300 × 500mm
1500 × 500 mm
Max. length of grinding
1300 mm
1500 mm
Max. width of grinding
350 mm
350 mm
Max height of grinding
600 mm
600 mm
Vertical moving distance of grinding head
120 mm
120 mm
Transverse moving speed of working table
40-900 mm/min
30 -900 mm /min
Grinding wheel disk diameter
360 mm
360 mm
Spindle speed
1400/700 r/min
1400/700 r/min
Electric motor power cooling down
0.4 Kw
0.4 Kw
Power of the main motor
1.5/2.4 kw
1.5/2.4kw
Overall dimensions(L × W × H)
2650 × 1050 × 2100 mm
2800 × 1050 × 2100 mm
Packing dimensions(L × W × H)
2980 × 1150 × 2200 mm
3200 × 1150 × 2280 mm
N.W. / G.W.
2800 / 3100 kg
3000 / 3300 kg
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
