1.1 Main specifications
Pulse equivalent: X: 0.001mm Z: 0.001mm
Control/compounding axis number: 2/2
Programming scope: ± 99999.999mm
Forward speed: 60000mm/min(0.001mm equivalent)
Program capacity: : Electronic disk 640K, which can store 200 programs, 10 parameters
Interpolation: Line, arc, metric system, English system straight/cone,
Multi-thread/single thread, tap

1.2 System resource
Display: 7"LCD is adopted with480× 234 DOT matrix
Electronic disk: 640k flash memory, which can store 200 programs and parameters
Input signal: 20-way on-off and optical isolation
Hand wheel interface: 1way, × L, × 10 and × 100 multiply factor

Encoder interface: 1 way, four-multiple frequency processing

Output signal: There are 15 ways relay power driving output and 2 ways
Relay contact output; And the X-Z triple-phase step motor interface is adopted 1 way 10-bit analogue output, output scope: 0-10 Vdriving signal (CP, CW) output in X, Y and Z directions

Communication: RS232C asynchronous serial port, USB interface
Time: Processing time

1.3 Brief introduction of system major functions
Program management functions: Full-screen editing (ISO code), rename, delete, serial input/output, USB input/output and so on.
Operating functions: Automatic, manual, pulse control, hand wheel, MDI, machine tool returning Point, single segment, pause, coordinate and cutting tool memory and optional Segment startup.
Parameters: Cutting tool parameter, clearance compensation, system parameter, digit parameter, Thread pitch error compensation and so on.
Figure: Real-time track processing figure