FEATURES
This machine adopts the periphery surface of the grinding wheel to grind surface of work piece. Vertical plane of work piece can be ground by the end face of the wheel. When ground, work piece is fixed on the electrical magnetic chuck or the table directly according to different ones.
The table moves longitudinally by hydraulic drive. The wheel head turns around transversely on the carriage either by hydraulic or by hand, and the device of automatic interlock is mounted. The carriage (together with the wheel head) moves vertically on the column either by hand or by mechanical operating, and an interlock device is mounted. The vertical ball screw, operated lightly and flexibly.
Cooling pump motor
0.12 KW
Working pressure
1-1.2 MPa
Cross feed travel
460 mm
Distance from spindle axis to working surface of table
max 600 mm, min. 155 mm
Elevating motor of wheelhead
0.55 KW
Feed system
Full-load power
9.2 KW
Grinding head interrupted feed per stroke (stepless speed)
5-25 mm
Grinding spindle motor
5.5 KW
Height (including magnetic table)
400 mm
Length
1,000 mm
Length of working surface of table
1,000 mm
Lubrication pressure
0.2-0.3 MPa
Manual cross feed per grad.
0.05 mm
Manual cross feed per rev.
3 mm
Manual vertical feed for wheelhead per grad.
0.005 mm
Manual vertical feed for wheelhead per rev.
0.5 mm
Max. carrying capacity
500 kg
Motor power of oil pump
3 KW
Net weight
3,500 kg
Oil pump motor
3 KW
Overall dimensions (L x W x H)
2,280 x 1,410 x 2,315
Quantity of table T-slot
3
Rapid wheelhead feed speed
350 mm/min
Spindle speed
1,440 r/min
Table
Table longitudinal feed
3-25 m/min
Table longitudinal travel
1,100 mm
Wheel dimensions (D x W x D) mm
400 x 50 x 203
Width
400 mm
Width of T-slot
18
Width of working surface of table
400 mm
Cross feed speed
0.3-2 m/min
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
