1. Column type of vertical drilling machine;
2. 3-phase with two- voltage for 220V~575V collocation;
3. All main parts are made with quality cast iron;
4. Single-speed motor, 9 or 12 step gear speed;
5. Strength spindle, large diameter column;
6. Worktable could be rotated and could be inclined +/- 45 degree;
7. With unloading tool, coolant system and fender device;
8. Thin oil lubrication;
9. Importable electrical components with CE, CSAand UL standard;
10. The model with A is electromagnetism clutch transmission feed, with B is mechanical feed.
Standard Accessories:
* Key type drill chuck
* Connecting bar for drill chuck
* Shaft sleeve for taper shank tool
* Wedge for taper shank tool
* Double open end spanner
Optional Accessories:
* Cross worktable
* Precision vice
* Lifting worktable by motor
* Electrical box
* Collet and handle of milling cutter
Model
PTY5035A/1 PTY5035B/1
Max. Drilling dia.(steel) and tapping dia (mm)
φ35 / M27
Max.Travel of spindle (mm)
190
Max.Distance from spindle to generating line of column (mm)
360
Max.Distance from spindle nose to surface of worktable (mm)
670
Max.Distance from spindle nose to surface of base worktable (mm)
1200
Max Travel of worktable and bracket
570
Swivel angle of worktable
±45°
Spindle taper bore
MT4
Spindle speed steps
9
Spindle speed range (r/min)
72 - 2150
Spindle feed steps
3
Spindle feed range (mm/r)
0.12, 0.24, 0.42
Dimension of worktable (mm)
570 × 570
Effective working area of worktable (mm)
700 × 470
Diameter of column (mm)
φ140
Power of motor (kw)
2
Machine dimension (mm)
900 × 600 × 2275
Packing dimension/Net weight and gross weight
1040 × 650 × 2220 mm
600 / 540 kg
Sets/20 Standard Container
18
Model
PTY5050A/1 PTY5050B/1
Max. Drilling dia.(steel) and tapping dia (mm)
φ50 / M36
Max.Travel of spindle (mm)
240
Max.Distance from spindle to generating line of column (mm)
380
Max.Distance from spindle nose to surface of worktable (mm)
600
Max.Distance from spindle nose to surface of base worktable (mm)
1170
Max Travel of worktable and bracket
530 (Manual)
Swivel angle of worktable
±45°
Spindle taper bore
MT4
Spindle speed steps
12
Spindle speed range (r/min)
48-2050
Spindle feed steps
3
Spindle feed range (mm/r)
0.12, 0.23, 0.4
Dimension of worktable (mm)
600 × 500
Effective working area of worktable (mm)
750 × 520 × 120
Diameter of column (mm)
φ180
Power of motor (kw)
3
Machine dimension (mm)
1040 × 600 × 2390
Packing dimension/Net weight and gross weight
1260×670×2280mm
730 / 650 kg
Lubrication method
Thin oil lubrication
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
