Общие сведения
Название:Horizontal Lathe (BJ1840)
Модель:BJ1840
Управление:Програмное
Класс точности:Обычной точности
Автоматизация:Ручной режим
Тип:Токарный станок
Product Description

-This machine tool can assume all kinds of turning works, it can turnings many kinds of the metric threads, the inch threads, the modutus pitches, the diametrical pitches which are in commen use, and it can bore, heaming, scraping oilcan.
-This tool is used of high intensity of cast iron, the surface of guideway has been quenched with high frequency, then it has been elaborate milling. It has high precision and long life.
-The gears of the headstock have been quenched with high frequency and elaborate milling, theyhave high precision and low noises.

Model BJ1840
Capacity Max. swing dia. Over bed Ø 458mm
Max. swing dia. Over toolpost Ø 288mm
Max. turning dia. Over bed Ø 380mm
Max. swing dia. In gap Ø 640mm
Length in gap 155mm
Max. workpiece length 1000mm
Max. machining length 900mm
Spindle Spindle bore diameter Ø 52  D/B series: Ø 77
Taper of spindle bore MT6  D/B series: BJ50: 1: 20
Type of spindle nose  
Spindle speed  
Feeds and threads Max. travel of upper toolpost 120mm
Max. travel of lower toolpost 230mm
Tool section 25x25mm
X feed range 40kinds 0.015~0.45mm/r
Z feed range 40kinds 0.03~0.90mm/r
Metric threads 53kinds 0.4~14mm
Inch threads 40kinds 2~56TPI
Module threads 44kinds 0.4~7π mm
Diametric pitch threads 32kinds 4~56 TPIπ
Tailstock Diameter of quill Ø 55mm
Max. travel of quill 120mm
Taper of quill (morse) No. 4
Motor Main motor power 4KW
Cooling pump motor power 0.09KW
Others Machine length 2250mm
Machine width 980mm
Machine height 1210mm
Machine weight 1750kgs

Сайт поставщика: madeinchina.com

Наши услуги:

  • восстановление изношенных деталей;
  • цветной и нержавеющий прокат со склада в Ростове-на-Дону;
  • механическая обработка металлов( токарные и фрезерные работы);
  • изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
Продажа б/у станков в Ростове
Rambler's Top100 рейтинг@Mail.ru