Main Features:
1 The frame of machine is composed of tank, worktable, left and right housings and RAM. So it has high strength and good rigidity. Also it takes vibration to eliminate stress.
2 Synchronization working principal of both machinery: Adopting electric-hydraulic proportional valve to ensure the synchronization of both machinery. The proportional valve is made by BOSCH company with very good performance such as small friction between mechanic action pairs, fine electronic amplifier and electric magnet with high controlling force and continuous action. There are two raster displayers on both sides of machine to inspect the position of RAM continuously and feed back the signal to control system, then the control system will control electric-hydraulic valve to make two cylinders synchronization on one machine. Because the raster displayers are installed to C plates, not on housing plates directly, the deflection of RAM and frame when working will not effect its measuring and controlling precision. When two machinery working together, the differential potentiometer installed between two machinery will transfer the mechanic synchronizing signal into electronic one and feed back to synchronization plate and control system. The signal will be enlarged by BOSCH amplifier to control the synchronization of both machinery by controlling electric-hydraulic proportional valve. So the synchronization of two machinery is achieved with high precision.
3 Through computer, the operator could communicate with machine. The computer has several service language, calculate and adjust the bending force automatically. Also it could calculate and control the dead point, speed changing point. The strokes (Y1, Y2) of RAM could make a small tilt to meet the special requirement of user.
4 Equipped with good guiding system, position measuring system and hydraulic balance system to meet the requirements of full length job and eccentric job.
5 Worktable compensation unit is adopted to make up for deflection of machine when working to make sure the precision of work piece.
6 The surface of cylinder has good wearing and heat treatment, so it has good lubrication and long service life.
Sales Manager: ROBBIE ZHANG
Model
Nominal Pressure (kn)
Worktable Length (mm)
Distance between Columns (mm)
Throat Depth (mm)
Ram Stroke (mm)
Max Opening Height (mm)
Main Motor Power (kw)
Overall Dimensions (mm)
2-100/3200
2x1000
2x3200
2600
320
150
450
2x5.5
2x3740x1585x2670
2-160/3200
2x1600
2x3200
2550
320
200
500
2x7.5
2x3740x2045x3080
2-160/3600
2x1600
2x3600
2950
320
200
500
2x11
2x4140x2045x3080
2-160/4000
2x1600
2x4000
3350
320
200
500
2x15
2x4545x2045x3080
2-160/5000
2x1600
2x5000
4100
500
200
500
2x15
2x5530x2435x3630
2-200/6000
2x2000
2x6000
5100
500
200
500
2x15
2x6530x2435x3630
2-250/3200
2x2500
2x3200
2700
400
250
560
2x15
2x4000x2250x4060
2-250/4000
2x2500
2x4000
3300
400
250
560
2x22
2x4800x2250x4060
2-250/5000
2x2500
2x5000
4100
400
250
560
2x22
2x5800x2250x4060
2-320/4000
2x3200
2x4000
3300
400
250
560
2x22
2x4060x2570x4560
2-320/5000
2x3200
2x5000
4300
400
250
560
2x37
2x5060x2570x4560
2-320/6000
2x3200
2x6000
5300
400
250
560
2x37
2x6060x2570x4560
2-400/4000
2x4000
2x4000
3100
400
320
625
2x37
2x4050x3240x3880
2-400/5000
2x4000
2x5000
4210
400
320
625
2x37
2x5050x3240x3880
2-500/4000
2x5000
2x4000
3100
400
320
630
2x37
2x4090x2596x5320
2-500/5000
2x5000
2x5000
4100
400
320
630
2x37
2x5090x2596x5320
2-500/6000
2x5000
2x6000
5100
400
320
630
2x45
2x6090x2596x5320
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
