1) The machine is composed of base, gantry, drilling unit, exchangeable worktable, chip removal system, electric system and centralized lubricating system etc.
2) Two exchangeable worktables can reduce the loading and unloading time and improve the production efficiency.
3) The machine is easy to operate because it uses stroke Self-controlled drilling unit
4) Workpiece are clamped tigitly by hydraulic clamps. For small workpiece it can clamp four groups together.
5) All running station can be shown directly in the computer.
6)It uses centralized lubricating system to extend the life time of the machine.
7) High efficiency and high precision, Good stability, Easy to operate.
Model
DPD
size of workpiece
Thickness of workpiece(mm)
(max. )80
Width× length(mm)
1000× 1650(one piece)
825× 1000(two piece)
500× 825(four piece)
drilling spindle
Diameter of drilling head
φ 12-φ 15
The mode of speed adjustment
transducer stepiess speed adjustment
Rotate speed(r/min)
120-560
hydraulic clamping
Thickness of clamping(mm)
15-80
Quantity of clamping cylinder
12
Start-up clamping
foot-switch
cooling fiuid
Model
forcing cycle
motor
Spindle(kW)
5.5
Hydraulic pump(kW)
2.2
Cooling pump(kW)
0.25
Chip removal motor(kW)
0.4
Servo system of X axis
1.5
Servo system of Y axis
1.0
overall dimensions
L× W× H
5190× 4963× 2780(Approox)
weight
Main body(t)
4
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
