1. With 5.7 LCD screen, Chinese and English interface.
2. Supports data switching. The controller can be used as a U-Disk, and it also can be connected with U-Disk.
3. Convenient to adjust the hole position with the handwheel.
4. Long life, nice feel, and reliable keypad.
5. Safe to operate. With alarming fuction, the system will give an alam and stop to run when the machine fails.
6. Safe to operate. With alarming fuction, the system will give an alam and stop to run when the machine fails.
7. Easy to operate and program.
8. Large capacity, it can store 2000 programmes and each programme can imput 100, 000 processing data.
9. Convenient to find the specific program by choosing the program number.
10. Standard designed circuit reduces the line interference and makes sure send the correct signal.
11. You can confirm whether the hole position is right by step test after the program is saved.
12. Reasonable designed mechanical part position makes the machine good features.
13. Standard spare parts offered.
14. Spare parts are all made by our factory. It is very easy to replaceable.
BM-CNC2ZK21
2 Axes 2-Head Brush Drilling And Tufting Machine
Model
BM-CNC2ZK21
NO. of axis
2-axis
Qty of heads
2 Heads,1 drilling head and 1 tufting head.
The stroke of X axis
550mm
The stroke of Y axis
150mm
Setting of Worktable
high-precision straight-line rail and ball screw,steady and durable.
Material of Brush Handle
Polyethylene, polystyrene, return materials, wood
Material of filaments
PP,nylon,bristle,stainless steel,brass wire
Application
To make varieties of flat brushes.
Diameter of filaments
0.08mm-1.2mm
The length of filament(outside the hole)
30mm
Diameter of hole
1mm-6mm
depth of hole
12mm
Maximum Drilling Speed
360-540 holes/minute
Maximum tufting Speed
240-360 holes/minute
Max Speed
15000n/min
Motor and driver
Panasonic servo motor
High-speed Motor
Italian Brake Motor
Adjust Speed
Frequency-conversion stepless-adjustable speed
Replaceable Fixture
FMS type. It can be easily changed to make other kinds of brushes.
Head mode
Flat or Martin
Programme Storage
Store 100 programmes,each can imput 100 thousand processing data.
Program System
CNC system,high precision,stability and efficiency
Dimension(L*W*H) of Mechanical part
1250mm*1400mm*1800mm
Dimension(L*W*H) of Controller table
570mm*670mm*1380mm
Gross weight
1T
Power
3-phase 380v, 50-60Hz
Total power
2.8kw
Compressed Air Pressure
0.6-0.8Mpa
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
