CNC lathe machine
10 years Machine Tool Manufacturing
Stable, high efficiency and accurate processing
CK6180
CNC lathe:
There are two types: Plain lathe and Inclined rail lathe. The Inclined rail lathe contain hard rail and line rail.
The model of Plain lathe: CK6130, CK6136, CK6135, CK6150L, CK6150B, CK6163, CK6180, CK-32, CK-50
Specification:
1)High rigidity: Through hole of main axle is Φ 100, adopting three-point supporting structure, with high accuracy and good shock resistance
2)Selective lathe head box: There are two alternative: 75-1000r/min, totally 18 levels mechanical transmission gear and 45-130-350r/min, totally 3 levels frequency control of motor speed
Machining accuracy
maximal turnaround diameter of the lathe
mm
800
maximal turnaround diameter of the dragging
mm
520
maximal machining length
mm
1000,1500,2000,3000
maximal length of turning
mm
850,1350,1850,2850
maximal horizontal stroke
mm
410
Maximal turnaround diameter
mm
970
turnaround effective width
mm
350
Width for rail of lathe bed
mm
550
Main transmission
Diameter for through hole of main axle
mm
100
Main axle type
C-11
Bore-hole of main axle
Φ120 1 20
Rotating speed range of main axle
r/min
7.5-1000 or 45-130-350
rotary speed grade of main axle
level
level 18 or degree 3
electric power of the main axle
kw
11
power supply
gross power
kw
14.5
Machining accuracy
Ellipticity on machining
mm
0.012
Machining roughness
μm
2.5
X travel positioning accuracy
mm
0.015
z travel positioning accuracy
mm
0.03
X travel repeatedly positioning accuracy
mm
0.01
Z travel positioning accuracy
mm
0.015
Electric knife rest
Cutter digit
degree
4(6 or 8 available)
dimension of cutter rod
mm
30 30
Electric knife rest
Bore-hole of tailstock sleeve
NO.5
Stroke of the tailstock sleeve
mm
250
Diameter of tailstock sleeve
mm
100
Dimensions and net weight
Dimensions of lathe tool (L x B x H)
mm
about 3525 1800 2000
net weight
kg
4100
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
