CNC lathe machine
10 years Machine Tool Manufacturing
Stable, high efficiency and accurate processing
CKCK6150L
CNC lathe:
There are two types: Plain lathe and Inclined rail lathe. The Inclined rail lathe contain hard rail and line rail.
The model of Plain lathe: CK6130, CK6136, CK6135, CK6150L, CK6150B, CK6163, CK6180, CK-32, CK-50
Specification:
1)Individual main axis: Main axis in installed individually, thick and solid tank body, vibration, noise and heating is reducted; The rigidity and precision of the main axle is improved with comparison to the lathe with identical lathe.
2)Separated transmission gear: Equipped with three-lever mechanical transmission gear, avoiding the influence on main axle arising from the vibration and heating of mechanical gearbox; Equipped with variable frequency non-polar speed regulation to ensure the low machining torque.
3)Sliding plates lengthened: Sliding apron and the supporting plate can be lengthened to increase the contact surface, making it more stable and endurable and can keep the precision continuously.
CK6150L
Machining accuracy
Positioning accuracy
mm
0.02
Repeatedly Positioning accuracy
mm
0.005
Ellipticity on machining
mm
0.005
Machining roughness
μ m
Ra1.6
Main transmission
Diameter for through hole of main axle
mm
Φ 82
main axle
D-8
Camlock
Conicity and Bore-hole Diameter of Main axle
mm
90; 1: 20
Rotating speed range of main axle
rpm
33-1600 three level, no limit
electric power of the main axle
kw
7.5
Power supply
Enter power
50Hz 380V
Gross power
kw
10.5
Machining Range
maximal turnaround diameter of the lathe
mm
500
maximal turnaround diameter of the dragging
mm
250
maximal machining length
mm
750/1000
maximal stroke of sliding plate (X travel)
mm
285
Electric knife rest
Cutter digit
4(6 or 8 available)
Repeatedly Positioning accuracy
mm
0.003
Tailstock
Bore-hole of tailstock sleeve
MT5
maximal stroke of the tailstock sleeve
mm
150
Diameter of tailstock sleeve
mm
Φ 75
Dimensions and net weight
Dimensions of lathe tool (L x B x H)
mm
2460/2710 1400 1800
net weight
kg
2390/2490
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
