The machine is mainly use for boring large and deep holes, (such as: Cylinder body of locomotive, steamship, car) also can milling the surface of the cylinder.
*Servo-motor control the table longitudinal move and the spindle up and down
Spindle's whirl use variable-frequency motor to adjust the speed, so it's can achieve of stepless speed change
*Electricity of the machine are designed for PLC and man-machine interaction
MAIN SPECIFICATIONS
1
Max. boring diameter
Φ 400mm
2
Max. boring depth
750mm
3
Spindle carriage travel
1000mm
4
Spindle speed(stepless speed change for frequency conversion)
50-1000r/min
5
Spindle feed travel speed
6-3000mm/min
6
Distance from spindle axis to carriagevertical plan
500mm
7
Distance from spindle end-face to table surface
25~-840 mm
8
Table dimensions L x W
500X1600 mm
9
Table working slot
5
10
Table longitudinal travel
1600mm
11
Table longitudinal travle speed
6-3000mm/min
12
Table latirudinal travel
300mm
13
Main motor ( Variable-frequency motor)
33HZ, 5.5KW
14
Table ongirudinal travel motor(Serve motor)
15Nm
15
Travel motor of spindle(Serve motor)
15Nm
16
Boring dimension accuracy
IT7
Milling dimension accuracy
IT8
Rundness
0.008mm
Clingricity
0.02mm
17
Boring roughness
Ra1.6
18
Milling roughness
Ra1.6-Ra3.2
16
Overall dimensions
2281X2063X3140mm
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
