These lathes can perform to turn end-faces, cylindricl surfaces and internal holes of various parts as well as metric, inch, module and pitch threads. The top slides can be operated individually by power for cutting short taper surface also, can be turned automatically through the compound movement combining longitudinal feed with the top slide feed, moreover, the machinery may be used for drilling, boring and trepanning. They are characteristics of power, high spindle speed, high rigidity. The various ferrous and non-ferrous metals parts may be turned through the heavy cutting by carbon alloytools.
Standard accessories:
1. Four-jaw chuck Φ 1250mm
2. CW61125L, CW61140L, CW61160L: Steady rest Φ120--480mm(for more than 2m)
CW61180L, CW61190L: Steady rest Φ400--700mm(for more than 2m)
3. Follow rest (for more than 2m)
4. Morse No. 6 Center
5. Center bush
6. Tools
7. Foundation screws
Optional accessories:
1. Metric chasing dial device
2. Inch chasing dial device
3. Inch leadscrew
4. T-type toolpost
SPECIFICATION
Model
CW61125
CW61140
CW61160
CW61180L
CW61190
CAPACITY
Max.swing diameter over bed
1250
1400
1600
1800
1900
Max.swing diameter over
crossslide
880
1030
1230
1400
1500
Width of bed
1100mm
Max.length of workpiece
1000 -8000mm
SPINDLE
Spindle nose
A15
Sindle bore diameter
130mm
Taper of spindle bore
Metric No.140#
Range of spindle speed
3.15-315r/min 21kinds
FEEDS
Longitudinal feeds range
0.1-12mm/r 56 kinds
Transversal feeds range
0.05-6mm/r 56kinds
Metrec thread range
1-120mm 44kinds
Inch thread range
3/8-28TPI 31kinds
Module thread range
0.5-60mm 45kinds
Pitch thread range
1-56TPI 25kinds
TAILSTOCK
Tailstock sleeve taper
Metric 80#
Tailstock sleeve diameter
260mm
Tailstock sleeve travel
200mm
MOTOR
Main motor power
30kW
Rapid motor power
1.5kW
Coolant pump power
0.125kW
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
