FEATURES:
Hardened and ground bedways and "V" tailed slide of saddle.
The spindle bore size is 80mm.
One-piece cast iron base.
Main driving gears are hardened and ground.
Headstock is lubricated by means of pump and oil bath.
Clutch furnished in apron is for over load of automatic feed.
Removable gap bed for large diameter wrok.
Easily cut screw and no need of changing gear.
Five-position auto carriage stop.
Foot brake gives rapid braking.
SPECIFICATIONS:
GH1640W
GH1860W
STANDARD EQUIPMENT
Swing Over Bed:
410mm 16"
460mm 18"
10" 3 jaw chuck
Swing Over Cross Slide:
222mm 8.75"
285mm 11.2"
12" 4 jaw chuck
Swing Over Gap:
650mm 25.63"
696mm 27.4"
Center MT-4
Distance Between Centers:
1000 40"
1500 60"
Center sleeve
Hole Through spindle:
80mm 3-1/8"
Pad
Width of Bed:
340mm 13.4"
Four way tool post
Spindle Nose:
D 1-8
16" Face plate
Taper in Spindle Bore:
MT-6
Steady rest
Number in Spindle Speeds:
12
Follow rest
Range of Spindle Speeds:
40~1600RPM
Range of Spindle Feeds:
0.0325~1.76mm(.0012"~.0672")/rev.
OPTIONAL ACCESSORIES
Range of Cross Feeds :
0.014~0.736mm(.0005~.0288")/rev.
Quick change tool post
Metric Threads:
0.1-14mm (41 kinds)
Taper attachment
Inch Threads:
2-112TPI (60 kinds)
Digital readout device
Diametral Threads:
4-112DP (50 kinds)
Chuck guard & Leadscrew cover
Module Threads:
0.1-7MP (34 kinds)
Diameter of Leadscrew:
36mm 1.41 "
Pitch Threads of Leadscrew:
6mm 4T.P.I
Maxium Cross Slide Travel:
220mm 9 "
Maxium Compound Slide Travel:
120mm 4-3/4 "
Tailstock Quill Travel:
130mm 5 "
Diameter of Tailstock Quill:
70mm 2-3/4"
Taper in Tailstock Quill:
MT-4
Power:
7.5KW / 10HP
Net Weight (approx):
2200kg
3130kg
Gross Weight (approx):
2400kg
3330kg
Overall Dimensions (LxWxH):
2420x1140x1680
2920x1140x1680
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
