CK6432 CNC lathe is mainly used for turning inner and outer cylindrical surface, end surface, taper surface, arc surface and thread of shaft, etc., with high efficiency and accurate processing. The cutting tools carrier is equipped with 4-station, 6-station or gang-type tool holder. The spindle speed is adjusted by frequency alternation. The spindle supporter is adopted with preloading Japan NSK accurate and angular contact rolling bearings and the bed way has been finely grinded after ultra-tone quenching.
Items
Specifications
CK6432*500/750/1000
Max. swing over bed
Φ360 mm
Max. swing over carriage
Φ150 mm
Max. length of work piece
500/750/1000mm
Range of spindle speed
100-2500rpm
Spindle bore
Φ52mm
Taper of spindle bore
MT6
Stations of tool carrier
4/6
Max. size of tool post
18x18mm
Min. setting unit :
Z cross
0.001 mm
Servo / stepper
X long.
0.001 mm
Moving speed of post
Z cross
7.6m / min.
X long.
7.6min.
Taper of tailstock quill
MT4
Max. range of tailstock quill
100mm
Motor power
3 kw
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
