Общие сведения
Название:Small Economical CNC Milling Machine (TX
Модель:TX36W
Торговая марка:datian
Управление:ЧПУ
Класс точности:Обычной точности
Автоматизация:Автомат
Тип:Фрезерный станок
Product Description

*economical CNC milling machine
*X/y/z axis travel/mm: 500mm*360mm*360mm
*Worktable size/mm: 850*320

1)this series machines have adopted processing machining center base with wide guideways and the guideways have good wear-resistant capability. Main casting parts are made of resin sand that delt with electric furnace smelting, which bestows the machine with a high rigidity. The adoption of ballscrews with bearing at both end has ensured the machine a stable accuracy.

2)With special design of modularization, the users can choose fellowing functions based on the same machine base:
*maual tool change type/semi-automatic tool change type,
*servo motor/stepper motor
*three axes linkage/four axes linkage
*worktable enclosed/ full enclosed
*speed changed by gear/speed changed by variable frequency
*optional full cover of machine not only make the machine attactive but also prevent the coolant from leakage.
*automatic tool change is suitable for several continuous complicated processings on the base of one-time tool change
*the gearbox has adopted stepping belts to obtain a high speed and can applied to the processings of drilling, tapping, milling, boring, etc.
*afte adding frequency changer and the adoption of gearbox with gear ratio 1: 4/1: 8, the machines have the function of stepless speed adjustment and automatic speed change to gain large torque with low speed, suitable for processing tapping screw thread and milling and cutting larger-diameter hole with low speed.

3) the machines are suitable for drilling, hole-enlarging, reaming, bevel edge, and tapping, for surface milling, step plane, slope, and milling groove, for cutting and milling curve, curve surface and cam, and for the management of several sets of machines

Main machine configuration:
1. Control system: HNC21I controller, HNC servo motor, 3 axis machining.
2. Frequency-changing speed adjustment, 3.0kw frequency-changing spindle motor, 100-3000 rpm spindle. BT40 taper;
3. Pneumatic cylinder for tool unclamp;
4. Fully enclosed splash guard, 3-5 seconds
5. 3206 ball screws;
6. C grade spindle bearing;
7. Separate cooling pumps;
8. Automatoc lubrication

Model NO. CNC/TX36W
worktable(L*W) (mm) 850*320
X,Y,Z axis travel (mm) 500*360*360
Spindle nose to worktable (mm) 480
Spindle centerline to column (mm) 360
Spindle Taper BT40
Spindle Speed (rpm) 150-3000/300/6000
Max gearbox ratio 1:2/1:1
Max torque(N.m) 40/20
Spindle motor power (Kw) 4kw variable-frequency motor
Tool change type Manual/semi-automatic
mini display unit (mm) 0.01/0.001
Axis motor(torque/power)(N.m/kw) Stepper motor 16N.m/1kw servo motor
Ball screw types φ 32xP6 ball screw
 Processing for Drilling ,tapping, boring and milling with high speed
Machine weight(kg) 3000
Overall dimension(L*W*H) 2000*2000*2100
Controller HNC21i

Сайт поставщика: madeinchina.com

Наши услуги:

  • восстановление изношенных деталей;
  • цветной и нержавеющий прокат со склада в Ростове-на-Дону;
  • механическая обработка металлов( токарные и фрезерные работы);
  • изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
Продажа б/у станков в Ростове
Rambler's Top100 рейтинг@Mail.ru