The movement of the five slides radially arranged with the center rest are controlled by cames respectively
The radial and axial positions of each tool may be adjusted by means of the microscrews with dial respectively.
The precision high speed bearing is adopted for the spindle and a pair of precision angular contact ball bearing is used for the back support
The unloading mechanism is adopted for the spindle pully to obtain accuracy of the spindle.
Model
CM1113
Max. dia. of bar stock to be machined
13mm
Max. feeding length of bar stock
80mm
Number of spindle speeds
21
Range of spindle speeds
600-6000 r/min
Camshaft speed
32
Number of camshaft speeds
0.031-10.5r/min
Ldling rapid travel speed of camshaft
6r/min
Number of tool slides
5
Motor power
2.2KW
Motor peed
940r/min
Overall dimensions excluding feeding support
1867x870x1469mm
Overall dimensions including feeding support
4737x870x1469mm
Net weight
1000kgs
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
