Общие сведения
Название:Surface Grinder (TH-M50100)
Модель:TH-M50100
Торговая марка:SJMC
Тип:?лифовальный станок
Product Description

Column and guide rail of this machine are integrated, grinding head is steady and precision is high. This machine adopts concealed structure of grinding head motor; The configuration is elegant and natural.

Transverse movement adopts double V type; Longitudinal is a assembly of one V type and one parallel guide rail, which has well guiding quality, little friction force, fixable movement. This kind of structure has higher steadiness and precision retentivity.

Longitudinal movement of worktable of machine adopts hydraulic nonpolar transmission and also can be transmitted by hand wheel. Transverse movement of worktable not only can be transmitted by motor, but also by hand wheel (use clutch gear to realize the interlocking of manual and power. ) Elevation and ascendance of wheel are controlled by hand wheel. Productivity efficiency is high.

Spindle adopts Japanese P4-grace precision bearing which processes high turning precision, steady running, low noise and high processing surface quality, the surface roughness is less than Ra0.063.

Transverse logical control adopts programmable controller to realize transverse automatic feed of machine by combining with stepping motor.

Automatic and periodic oil supply of lubricating system.

Auto feed realizing export non-contact output can suitable for frequent feed and inverting of small work piece. Reliability is high.

Magnetizing and demagnetization controller realizes non-contact output and able to suit for frequent magnetization and demagnetization within very short time as to avoid damaging and distoring the electromagnetic chuck or work piece, and ensuring the precision of work piece.

Model
 

 
TH-M50100
 
Workable size(L×W)
 
mm
 
1000×500
 
Longitudinal travel of worktable
 
mm
 
1080
 
Transverse travel of worktable
 
mm
 
540
 
Maximum distance from spindle axis to worktable surface
 
mm
 
630
 
Maximum load of worktable(Including chuck)
 
kg
 
700
 
“T” slot of worktable
 
mm×N
 
18×3
 
Movement speed of worktable
 
m/min
 
5~25
 
Transverse auto feed of worktable
 
mm
 
0~30
 
Transverse rapid movement
 
mm/min
 
780
 
Transverse feed of hand wheel
 
1 gra
 
mm
 
0.02
 
1 rev.
 
mm
 
5
 
Spindle rapid vertical feed
 
mm/min
 
1000
 
Spindle wheel feed
 
1 gra
 
mm
 
0.002
 
1 rev.
 
mm
 
0.4
 
Rotating speed of grinding wheel
 
r/min
 
1440
 
Grinding wheel size
 
mm
 
355×127×30~50
 
Spindle motor
 
kw
 
7.5
 
Hydraulic motor of workable movement
 
kw
 
3HP-6P
 
Auto motor of transverse movement
 
Nm
 
6
 
Coolant pump
 
w
 
40
 
Flatness of work piece
 
mm
 
≤0.005
 
Roughness of work piece
 
um
 
≤Ra0.63
 
Overall dimension
 
cm
 
287×222×205
 
Packing dimension
 
mm
 
2950×2220×2150
 
Net/gross weight
 
kg
 
4000/5000
 
Dimension of permanent magnetic chuck
 
mm
 
500× 1000mm
 

Сайт поставщика: madeinchina.com

Наши услуги:

  • восстановление изношенных деталей;
  • цветной и нержавеющий прокат со склада в Ростове-на-Дону;
  • механическая обработка металлов( токарные и фрезерные работы);
  • изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
Продажа б/у станков в Ростове
Rambler's Top100 рейтинг@Mail.ru