Lathe\lathe adopts ISO international code, keyboard manual data input, and it is also provided with program of power cut-off protection and the functions of automatic diagnosis, and with RS232 interface.
Longitudinal and cross feeds are effected by ball leadscrews driven by servo motors.
Either vertical or horizontal 4 station or 6 Station tool post as well as gang tool can be selected.
The post is located on precision contrate gears with ahigh repeated positioning accuracy.
Both chuck and tailstock are supplied with hydraulic or manual or pneumatic type.
The surface of the bedways is supersonic fequency hardened and precision ground with a long service lift.
The spindle bore size is 80mm. The spindle system is high in the rigidity and accuracy, there is no vibration when turning with a cuttin gdepth of 8mm. An invertor is used to realize variable speed.
ITEMS
CK6140ZX CK6240ZX
CK6146ZX CK6246ZX
Max. swing over bed
F 400mm
F 460mm
Max. swing over slide
F 210/ F 165mm(gang tools)
F 250/ F 205mm(gang tools)
Max. Length of workpiece
750mm 1000mm 1500mm
Max. cross travel(x)
250/ 330mm (gang tools)
*Max Swing in gap
F 650mm
F 700mm
*Length of gap
200mm
Spindle bore
F 80mm
Taper of Spindle bore
MT 7
No. of spindle speeds
stepless
Range of spindle speeds
100-2000rpm
Longitudinal rapid traverse
10m /min
Cross rapid traverse
8m /min
Range of threading
0.150 ---- 30.000mm
Taper of tailstock sleeve
MT4
MT5
Size of tool shank
25x 25mm
No. of tool post stations
4-way or 6-way or gang tools
Power of main motor
5.5kw
Coolant pump motor power
75kw
Repeatability(x/z)
0.0075/ 0.01mm
Min. input
0.001mm
Overall dimensions (L×W×H)
2060(2310)(2790)×1180×1500
Net weight
2380 2580 3050
The items with "*" are only for 62 Series lathes.
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
