Общие сведения
Название:CNC Lathe (CK-36)
Модель:CK-36
Управление:ЧПУ
Класс точности:Высокоточный
Автоматизация:Автомат
Тип:Токарный станок
Product Description

CNC lathe machine
10 years Machine Tool Manufacturing
Stable, high efficiency and accurate processing
CK-36

CNC lathe:

There are two types: Plain lathe and Inclined rail lathe. The Inclined rail lathe contain hard rail and line rail.
The model of Plain lathe: CK6130, CK6136, CK6135, CK6150L, CK6150B, CK6163, CK6180, CK-32, CK-50

Specification:
1)Entire Optimization: This series of machine lathe is entirely optimized on the base of the precious plain lathe and individual main axis lathe, with better performance, much more beautiful and practical.

2)Easily upgraded: The imported bearing with high accuracy and high speed can be selected and assorted, the machining accuracy and the efficiency can be upgraded directly, the coupling port for the back-up motive chuck, the high-speed and low-noise leather belt can be selected and employed.

3)Advanced structure: Lathe apron and the dragging board is lengthened and stuck with plastic, slight capacity feeding is accurate, the accuracy is kept permanently. All in one of lathe foot(CK-50 is segregation), with intensified stability and rigidity, with convenient hoisting and installation and with compact and generous structure;

4)Setting on the upper side for the main motor, the main motor is installed on the lathe leg, the short transmission leather belt facilitates the high speed and low noise, easily installed and maintained, easily change the power ( variable frequency and AC servo)

  CK-36



Machining   accuracy 
Positioning accuracy mm 0.015
Repeatedly  Positioning accuracy mm 0.003
Ellipticity on machining mm 0.005
Machining roughness μm Ra1.6

  
 Main transmission
 
Diameter for through hole of main axle mm Φ52
Conicity of inner hole of main axle   NO.6
Main axle type   A2-6
Rotating speed range of main axle rpm 3000-3600
Electric Power of main axle kw 5.5
   Power supply Enter power   50 Hz  380V



Machining  Range
Maximal turnaround diameter of the lathe mm 420
Maximal turnaround diameter of the dragging board mm 230
Maximal machining length mm 550/750
 Width for rail of lathe bed mm 300
 Electric knife rest Cutter digit   4,6 or 8 available

Repeatedly  Positioning accuracy
mm 0.003

Tailstock
Bore-hole of tailstock sleeve   NO.4
Maximal stroke of the tailstock sleeve  mm 100
Diameter of  tailstock sleeve mm Φ52
Dimensions and net weight Dimensions of lathe tool (L x B x H)  mm 2100  1300  1700
Net weight kg 1700/1900


Сайт поставщика: madeinchina.com

Наши услуги:

  • восстановление изношенных деталей;
  • цветной и нержавеющий прокат со склада в Ростове-на-Дону;
  • механическая обработка металлов( токарные и фрезерные работы);
  • изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
Продажа б/у станков в Ростове
Rambler's Top100 рейтинг@Mail.ru