1. Column type of vertical drilling and milling machine;
2. With trochoid thin oil lubrication;
3. 3-phase with two- voltage for 220V~575V collocation;
4. All main parts are made with quality cast iron;
5. Single-speed motor, 12 step gear speed;
6. Unload tool device and coolant, fender device;
7. Drilling diameter above 35mm (including 35mm) with milling function;
8. Strength spinlde, large diameter column;
9. Worktable could be rotated and could be inclined (+/-)45 degree;
10. Motor driven lifting of worktable;
11. Digital readout ofr the display of speed and cutting depth for drilling diameter above 35mm (including 35mm);
12. Micro feed is available;
13. Superior quality of gears with hardened and lapped gears of surface;
14. Main motor with break;
15. Importable electrical components with CE, CSAand UL standard;
16. The model with A is electromagnetism clutch transmission feed, with B is mechanical feed.
Standard Accessories:
*Key type drill chuck
*Connecting bar for drill chuck
*Shaft sleeve for taper shank tool
*Wedge for taper shank tool
*Double open end spanner
Optional Accessories:
*Cross worktable
*125mm Precision vice
*Lifting worktable by motor
*Electrical box
*Collet and handle of milling cutter
Specification
Model
PTZY5030B/5030A
PTZY5035B/5035A
PT5040B/5040A
PTZY5050B/5050A
Max. drilling dia.(steel) and taping dia.(mm)
Φ30 / M20
Φ35 / M22
Φ40 / M24
Φ50 / M30
Max. milling cutter diameter
80 mm
80 mm
80 mm
Max. travel of spindle
155 mm
190 mm
200 mm
240 mm
Max. distance from spindle to generating line of column
320 mm
340 mm
360 mm
360 mm
Max. distance from spindle nose to surface of worktable
625 mm
665 mm
590 mm
590 mm
Max. distance from spindle nose to surface of base worktable
1180 mm
1195 mm
1175 mm
1170 mm
Max. travel of worktable and bracket/Manual (Mechanical)